969 reviews analysed
1. Heat Gun, URBEST Mini Hot Air Gun 300W Multi-Purpose Electric Heating US Plug Tool for DIY Craft with 40Pcs Heat Shrink Tubing and 50Pcs Shrink Wrap Bags (White heat gun)
- HIGH QUALITY MATERIAL: The body is made of ABS which has some functions such as heat resistance, low temperature resistance and so on
- Outlet is made of stainless steel which is not easy to damage,simple and durable
- BEAUTIFUL DESIGN: Stainless steel bracket can whirl about 100 degree and it can stand on the table safely
- The left and right sides have a heat sink which can reduce th internal temperature and prolong the service life
- GOOD SAFETY PERFORMANCE: The switch is very safe and anti-electric shock
- The length of wire is about 1Meter, you can do it what you want
- This heat gun has passed the Restriction of Hazardous Substances
- EASY TO USE: It is very easy to use it. Just keep about 3-5cm distance from your DIY craft and heat it at about a 45 degree angle so that avoiding hurt by it
- The temprature can not be adjusted, but it can reach at about 200°C / 390°F in few seconds which heat up quickly and works like a charm.
- SUITABLE SIZE: Dimension: 240x50mm / 9.44×1.97inch
- Besides, We provide a 12-month worry free warranty and easy to reach friendly customer service Soft clay, embossed powder and heat shrinkable film heating
It is the best choice for URBEST mini hot air gun!
We have registered the brand “URBEST”in America, we will take respnsibility for our product. So do not worry to purchase our product.
This heat gun is very handy to use because it is light weight and good feeling when use it in a long term.
Good assistant for DIY craft
This minihot air gun is widely applied to heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
Please do not use it more than 10 minutes in one time, just turn off then turn on for working continuously.
Size: 240*50mm / 9.44*1.97inch
Wire length 100cm/39.3Inch
Working temperature: 200°C / 390°F
Rated power: 300W
Material: ABS,Stainless Steel
Weight: approx. 270g
Plug Type: US Plug
Working time: 8 minutes
Heat Shrink Tubing Kit:
Supplied internal diameter: 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
Shrinkage Ratio: 2:1
Length of each piece:150mm
Mini Heat Gun x1
40Pcs 2:1 Heat Shrink Tubing Kit
50Pcs Shrink Wrap Bags
Manual (English) x1
30-Day money back guarantee
12-Month worry-free warranty
24 Hours easy-to-reach customer service
2. LDK Mini Heat Gun, Electric Phone Repair Tool Compact Hot Air Gun for DIY Shrink Wrap Drying Paint Embossing 110V 300W
- ★ Hot air shrink gun was made of high quality stainless steel and ABS plastic, mini dimensions 225*47mm / 8.86*1.85in.
- ★ Handing part adopts salient point nonskid designs that cause safe hand holding with small energizing.
- ★ Voltage&Cooling Holes: Voltage 110V, the temp of the nozzle could reach to 200° in seconds. The heat vents of heat gun tail can decreased the internal high temp and extend the life.
- ★ Suitable for: This excellent compact heat gun can be used for heating shrinkable film, embossed powder, rubber stamp. Built-in stand for self-support and table top use.
- ★ Warm Tips: The temp of the nozzle could reach to 200° in seconds, please don’t use it more than 10 minutes in one time. [12 Month Warranty] [100% Money Back Guarantee] If you’re not happy for any reason, simply contact us and we’ll give you a full refund and no need to return the product.
Type: Constant temperature
Working Temperature: It can reach at about 200°C / 390°F within a few seconds
Rated Power: 300W
Power Type: AC power supply
Rated Voltage: 110V
Plug Type: US plug
Power Cable Length: 95cm/37 inch
1 * Hot Air Gun
1 * User Manual
1. This kind of heat gun can not adjust the temperature but it heats up quickly at about 200°C theoretically.
2. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
3. Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed.
4. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
5. Caution with child ! ! ! Please minor children in the safe use of hot air gun under the guidance of an adult to accompany!
6. Do not use it continuously for more than 10 minutes to avoid overheating the machine!
7. Do not touch the hot nozzle when using or just after use.
3. TICONN 250PCS Heat Shrink Wire Connectors, Waterproof Automotive Marine Electrical Terminals Kit, Crimp Connector Assortment, Ring Fork Hook Spade Butt Splices
- 【PREMIUM QUALITY】: Thick copper barrel ensures strong secure crimping every time, providing minimal voltage drop, high current flow, and less heat. These will prevent short circuits and problematic wiring that inferior connectors are known for
- 【DURABILITY】: Each terminal features a thick tinned copper barrel that resists corrosion to hold the wire tight when crimped. The barrel is created from one seamless piece of copper that eliminates the problem of the barrel opening. Your wire will never slip out of the connector
- 【WATERPROOF】: Insulation tubing has unique dual-walled design. High quality 3:1 shrinkage tubing has a heat-activated sealant lining to provide a 360-degree secure seal. It’s flame-retardant, waterproof, and can be used underground
- 【WIDE APPLICATIONS】: Compliant with all electrical standards, Perfect for marine and automobile applications, whether you are working on your boat, Vehicle, Home or scientific project, our electrical crimp connector will ensure strong watertight seal to make sure everything bond correctly
- 【TICONN BRAND QUALITY COMMITMENT】: We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and 12-month warranty. 100% Satisfaction for risk-free shopping!
4. Wagner Spraytech Wagner 0503038 HT400 Heat Gun 650ᵒF Basic pack
- DURABLE HEAT GUN: The HT400 precision heat tool is a versatile tool for home, shop and hobby projects and has a 650°F (343°C) temperature setting
- MANY APPLICATIONS: This versatile heat gun tool can be used for electrical repair, embossing, stripping paint, bending plastic pipe, shrink wrapping and tubing, and more
- PRECISE CONTROL: Small size makes this an ideal heating tool for getting into hard-to-reach places and concentrating high heat on small areas
- COMPACT DESIGN: Pencil-like design and 360 watts of power makes this heat tool great for delicate projects. The power tool fits comfortably in the user’s hand and weighs only a pound
- HANDS FREE FEATURE: Use the installed, retractable stand for hands free operation to easily complete all of your household heating and electrical projects
The HT400 Precision Heat Tool is a versatile tool for home,shop and hobby projects. Its small size is ideal for getting into hard to reach places and working on delicate projects related to crafting and electronics. Its simple design has one temperature setting of 650ºF and an integrated stand for hands-free work.
From the Manufacturer
The HT400 Heat Gun gives outstanding performance in a small package. The heat gun is ideal for crafts and hobbies. Use it to apply embossing powders, applique and shrink wrap. Remelt adhesives and form plastic material. It is also great for applying electrical shrink wrap.
5. TICONN 150PCS Solder Seal Wire Connectors Kit, Heat Shrink Butt Connectors, Waterproof and Insulated Electrical Wire Terminals, Butt Splice
- ✔️【EASY AND FAST PROCESS】All-in-one step solder and seal process. No need for crimp tools and soldering machine. Timer and mess saver
- ✔️【WATERPROOF AND INSULATION】Dual-walled design – Outside Polyolefin tubing provides insulation and improves pullout strength
- Hot Melt Adhesive & Solder inside ensures wires tightly connected and avoids wires slipping out of the terminal
- ✔️【STAY ORGANZIED】Our connectors come within a storage box, easy to store and carry. Color-coded tubing makes it easy to identify the right size of the connector for every application
- ✔️【WIDE APPLICATIONS】Shrinking ratio: 2:1. Ideal used for Automotive, Boat, Marine and other Outdoor Applications
- ✔️【TICONN BRAND QUALITY COMMITMENT 】We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and 12-month warranty. 100% Satisfaction Guarantee for risk-free shopping!
Easiest wire connector on the market
TICONN solder seal connectors will make your wire connection waterproof just in seconds;
also it applies mechanical damage protection and prevents wire corrosion!
Our connectors are an irreplaceable tool for fast, reliable and effective wire connection in any place and are appreciated by handymen all over the world!
40 x White Connectors: Suits Cable/ Wire Sizes 0.25-0.34mm² (A.W.G:26-24);
50 x Red Connectors: Suits Cable/ Wire sizes 0.5-1.0mm² (A.W.G:22-18);
50 x Blue Connectors: Suits Cable/ Wire sizes 1.5-2.5mm² (A.W.G:16-14);
10 x Yellow Connectors: Suits Cable/ Wire sizes 4.0-6.0mm² (A.W.G:12-10)
HOW TO USE:
1.Select the proper size connector for the wires, stripped wires.
2.Insert the stripped wires into the connector.
3.Apply heat evenly to the connector from the 2 ends first until tubing shrinks and the adhesive flows, then continuously apply heat evenly until solder sleeve melt and seal.
1.For best result, please use a hot air gun and rotate the connector to evenly apply heat.
2.Please raise the temperature from low to high gradually when you use the hot air gun to heat the wire connector.
3.Please DO NOT set the high temperature at the beginning, or the surface of connector will be over-heated, which will lead to the tube melt while the solder ring still not melt.
4.Keep the hot air gun at the proper distance. Don’t get too close.
Shrinkage ratio 2:1
Minimum shrink temperature: 80°C
Minimum temperature for solder to melt: 138°C
Operating temperature :-55℃ – 125℃
Waterproof Class: IP 67
6. 540 PCS Wirefy Heat Shrink Wire Connectors – Electrical Terminals Kit – Marine Automotive Crimp Connector Assortment – Ring Fork Hook Spade Butt Splices
- WIREFY MOST VERSATILE ELECTRICAL CONNECTOR KIT – Ring, fork, hook, spade and butt splice heat shrink wire connectors are included in this multipurpose electrical connector kit. You will not run out of heat shrink wire connectors when working on your next wiring project.
- DURABILITY AND WEATHER RESISTANCE – Thick copper barrel ensures a strong wire crimp every time. Your wire will never slip out of these connectors. Adhesive lined heat shrink tubing provides high tensile strength, as well as resistance to weather, stretch and mechanical damage. Prevent wire corrosion in your electrical connections.
- EASE OF APPLICATION – Strip wire insulation, crimp terminal barrel with a wire crimper, and apply heat with a heat gun while rotating a connector. Heat shrink tubing will reduce in size and adhere to the wire. No soldering kit needed. Start making secure and durable connections in seconds.
- COMPLIANT WITH ALL ELECTRICAL STANDARDS – Wirefy heat shrink connectors are compliant with ROHS, ISO 9001:2008, SGS and CE standards. Prevent wiring failures and reduce equipment downtime by choosing certified electrical connectors.
- WIREFY QUALITY COMMITMENT – We stand behind the quality of our electrical connectors. Our client experience team will work on every inquiry to provide comprehensive product support and ensure your complete satisfaction with Wirefy electrical connectors. Start making high quality connections today.
7. TICONN 200PCS Heat Shrink Butt Connectors Kit, Insulated Waterproof Electrical Marine Automotive Wire Crimp Terminals, Butt Splice (3 Colors / 3 Sizes)
- ✔️【PREMIUM QUALITY】Thick copper barrel ensures strong secure crimping every time, providing minimal voltage drop, high current flow, and less heat. These will prevent short circuits and problematic wiring that inferior connectors are known for
- ✔️【DURABILITY】Each terminal features a thick tinned copper barrel that resists corrosion to hold the wire tight when crimped. The barrel is created from one seamless piece of copper that eliminates the problem of the barrel opening. Your wire will never slip out of the connector
- ✔️【WATERPROOF】Insulation tubing has unique dual-walled design. High quality 3:1 shrinkage tubing has a heat-activated sealant lining to provide a 360 degree secure seal. It’s flame-retardant, waterproof, and can be used underground
- ✔️【WIDE APPLICATIONS】Compliant with all electrical standards, Perfect for marine and automobile applications, whether you are working on your boat, Vehicle, Home or scientific project, our electrical crimp connector will ensure strong watertight seal to make sure everything bond correctly
- ✔️【TICONN BRAND QUALITY COMMITMENT】We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and 24-month warranty. 100% Satisfaction Guarantee for risk-free shopping!
Easiest wire connector on the market – TICONN 200 PCS Heat Shrink Butt Connectors
Whether you are working on your boat, vehicle, home or scientific projects, TICONN heat shrink butt connectors will ensure strong crimps, increased current flow and waterproof connections every time!
Comply with all Relevant European Standards, Shrinkage Ratio: 3:1.
Dual-walled: polyolefin tubing on the outside and hot melt adhesive in inside.
Wire gauge imprint on connectors and color identification.
Ideal translucent provides tensile strength, allows visual inspection.
Allows visual inspection, prevents corrosion, and provided a waterproof seal.
–Shrinkage ratio 3:1
–Minimum shrink temperature: 80°C
–Full recovery temperature: 130°C
–Operating temperature: from -55°C to 125°C
For best results, please choose the right connector, use a hot air gun, heat evenly until connector reduces in size and the adhesive flows, filling gaps within the terminals.
90 x Red Connectors: Suits Cable/ Wire Sizes 0.5-1.0mm² (A.W.G:22-16);
90 x Blue Connectors: Suits cable/ wire sizes 1.5-2.5mm² (A.W.G:16-14);
20 x Yellow Connectors: Suits cable/ wire sizes 4.0-6.0mm² (A.W.G:12-10);
1 x PP Storage Case
Guarantee & Friendly Customer Service:
TICONN guarantees all buyers 100% satisfaction, once you find any problem of the product, please feel free to contact us, we will solve it as soon as we can.
100% Satisfaction Guarantees for risk-free shopping!
8. Master Appliance HG-501D Industrial Heat Gun, Quick Change Plug-In Heating Element, 1200° F, 120V, 1740W, 14.5 Amps, Assembled In USA
- Industrial quality heavy duty heat gun: rugged die-cast aluminum housing with an attached adjustable 90-degree rubber backed stand for hands free use on bench tops
- Temperature and power ratings: 1740 watts of power reaches a max temperature of 1200F quickly (nozzle measurement). upgraded long-life, high-speed universal motor delivers 2x plus run life
- High 27 CFM airflow at 3400 fpm exceeds industry standards and gets tough jobs done faster
- New quick-change plug-in heating Element with balanced airflow over Element for maximum heating efficiency. Redesigned ergonomic soft grip handle maximizes user comfort.
- Fully optimized design for improved serviceability. Full selection of replacement parts available. Assembled in the USA using global components by the heat tool experts at Master since 1958.
The new Master D Series industrial heat guns are a part of an extensive history of high end, heavy duty, Professional heat guns engineered and assembled by the master heat tool experts at their Wisconsin, USA headquarters. The die cast aluminum housing D Series hg heat gun exceeds industry standards for performance, reliability and reparability. Delivering 2x motor run life From a powerful high-speed Universal motor, industry best 27 CFM airflow at 3400 fpm, balanced airflow over the heating element for maximum heating efficiency, fixed air intake for temperature consistency, quick-change plug-in heating elements, and a complete offering of repair Parts for quick, easy service. This heat gun is available in 4 different temperature ratings: 400F, 800F, 1200F, 1400F (when measured at the nozzle) and one fully variable temperature heat gun Offering 100F to 1200F temperature adjustment. This versatile heat gun is ideal for a wide array of uses: shrink wrap, shrink tubing, shrink waterproof electric wire connectors, butt Splice terminals, shrink packaging, bend plastics, bend PVC, weld plastics, join tarps, soften adhesives, dry and heat parts, strip paint, restore trim, defrost frozen pipes, heat sensitive materials, upholstery furniture, solder, de-solder, embossing, window tinting, car Wrapping, automotive bumper repair, dent removal, vinyl and leather repair, loosen rusty screws and bolts, remove decals, labels and stickers, remove old flooring, wax surfboards, snowboards or skis, dry wet wood, dry paint, This list goes on. This master heat gun is designed for long term, quality use in the most demanding industrial and commercial environments.
9. Kuject 120PCS Solder Seal Wire Connectors, Heat Shrink Butt Connector Waterproof Insulated Electrical Butt Terminals Wire Splice for Automotive Marine Boat Truck Trailer Wiring
- More convenient than the old way: no need to crimp, just use a heat gun then you can finish the connection.
- Cost effective Butt Connectors: 120PCS, include 40 Red, 40 Blue, 30 White, 10 Yellow.
- Easy to identify: Specific color for Specific size, easy to pick up for use.
- Waterproof and Insulated: widely used for marine and automobile.
- High Quality – Comply with all relevant European standards
- Shrinking ratio: 2:1
10. Craftsboys 530pcs 2:1 Heat Shrink Tubing + Hot Air Gun, Heat Gun, Electrical Wire Cable Wrap Assortment Electric Insulation Heat Shrink Tube Kit
- Tube Material:Made of Polyolefin, Shrinkage Ratio:2:1 (will shrink to 1/2 its supplied diameter)
- Length: 45mm, Internal Diameter: 1.5mm/2mm/3mm/4mm/5mm/6mm/8mm/10mm，Shrinking ratio: 2:1
- Suitable for electrical insulation, wire bundling, colour coding, mechanical protection, wire/cable joints and daily repairs etc
- Heat Gun: 3.3 FT Long Cable. Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside,simple design and durable quality, mini dimensions 240*50mm / 9.44*1.97in
- Voltage&Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200° in seconds.The heat vents of heat gun tail can decreased the internal high temp and extend the life
-2:1 Shrink Tube x 530pcs
-Heat Gun x 1
(Quantity x Supplied internal diameter)
80pcs x 1.5 x 45mm approx.
160pcs x 2.0 x 45mm approx.
60pcs x 3.0 x 45mm approx.
100pcs x 4.0 x 45mm approx.
30pcs x 5.0 x 45mm approx.
20pcs x 6.0 x 45mm
20pcs x 8.0 x 45mmapprox.
20pcs x 10.0 x 45mm approx.
20pcs x 10.0 x 45mm approx.
20pcs x 10.0 x 45mm approx.
Minimum Shrinkage Temp: +70°C
Full Shrinkage Temp: +110°C maximum
Operating Temperature: -55°C to + 125°C
Supplied internal diameter: 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm,10mm
Item Shape: Round/Flat
Color: Black, Red, Blue, Yellow, Green,Clear
By our suggestions above, we hope that you can found Electric Heating Shrink for you.Please don’t forget to share your experience by comment in this post. Thank you!