Top 10 Nozzle Cooling Fan For A 3D Printer

0

Nowadays, there are so many products of nozzle cooling fan for a 3d printer in the market and you are wondering to choose a best one.You have searched for nozzle cooling fan for a 3d printer in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings nozzle cooling fan for a 3d printer which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

930 reviews analysed

1. 3D Printer Ender 5 Full Assembled Extruder Kit 24V with 2pcs Cooling Fans / 5pcs 0.4mm Nozzles for 3D Printer Ender 5 / Ender 5 Pro

3D Printer Ender 5 Full Assembled Extruder Kit 24V with 2pcs Cooling Fans / 5pcs 0.4mm Nozzles for 3D Printer Ender 5 / Ender 5 Pro

Feature

Description

3D Printer Parts -Creality Ender 5 Pro Full Assembled Extruder Hot End Kit with 5 Piece 0.4mm Nozzles for Ender 5 / Ender 5 Pro 3D Printer
Installation type: external thread connection.
Scope of application of 3D Printer Extruder Hot End Kit: Creality 3D printer Ender 5 /Ender 5 Pro.
Nozzle size: 0.4mm (also suitable for 0.2mm 0.3mm 0.5mm mk8 nozzle) Operating temperature
range: -40~+260°C (-40~+500°F).
Material: Aluminum / Stainless Steel / Brass.
Throat pipe length: 30mm.
Aluminum block size: approx. 20 x 20 x 10mm.
Thermistor and heater cable length: 1.3 meter.

Package of 3D Printer Extruder Hot End Kit:
1pc x Aluminum Block.
1pc x Heating Tube (length of heating tube is 1.3 meter, 24V 40W).
1pc x Brass Nozzle (0.4mm).
1pc x M6*30mm Throat Pipe (built-in Teflon).
1pc x Thermistor / Brass sleeve
2pcs x Cooling Fans.
5pcs x 0.4mm Nozzles

2. Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 3D Printer

Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 3D Printer

Feature

Description

Specification:
Type: 4010
Materials: Plastic
Bearings: Oil-bearing
Operation Voltage: DC 24V
Fit For: Creality Ender 3, Ender 3X, Ender 3 Pro
Weight: 0.078KG

Package Included:
1x DC 24V Extruder Hot End Fan
1x DC 24V Turbo fan

3. Anet MK8 Extruder Kit for Anet A6 3D Printer, Hot End Extruder Set Including – Extruder Motor, Cartridge Heater, Thermistor, Throat Tube, Heater Block, 0.4mm Nozzle, Cooling Fan and Heat Sink

Anet MK8 Extruder Kit for Anet A6 3D Printer, Hot End Extruder Set Including - Extruder Motor, Cartridge Heater, Thermistor, Throat Tube, Heater Block, 0.4mm Nozzle, Cooling Fan and Heat Sink

Feature

Description

MK8 Extruder kit / MK8 Hotend with fan – Anet A6 3D printer Accessories

Description:
–Suitable for: Anet A6 3D Printer
–Axis speed: 40mm/s
–Nozzle flow rate: about 24cc/h
–Nozzle diameter: 0.4mm extruder nozzle.
–Print material: ABS, PLA 1.75mm / 3.0mm filament
–Stepper motor model: SL42STH40-1684A
–Cooling fan operating voltage:12V
–The length of the Cartridge heating head is 0.5m, the length of The stepping motor cable is 1m.
–K-type thermocouple 500MM link line. NTC 100K B=3950
–Heat sink: 40*40*10mm
–Extrusion head: voltage 12V, power 40W
–Extrusion head heating voltage 12V, preventing 5-9 ohms, 500MM cable.

Package list:
1 x Printer head kit for Anet A6 3D printer

4. 2 PCS Nozzle Cooling Fan for BIBO 2 Touch 3D Printer

2 PCS Nozzle Cooling Fan for BIBO 2 Touch 3D Printer

Feature

5. Creality 3D Printer Ender 3 Replacement Parts Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing /4010 Cooling Fan×2/0.4 Nozzle×5 for Ender 3 / Ender 3 pro/Ender 3X

Creality 3D Printer Ender 3 Replacement Parts Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing /4010 Cooling Fan×2/0.4 Nozzle×5 for Ender 3 / Ender 3 pro/Ender 3X

Feature

Description

3D Printer Replacement Parts Ender 3 Hotend Extruder Heating Kit
with Capricorn Bowden PTFE Tubing XS Series
3D Printer Creality Ender 3 Pro Extruder Hot End Kit:
Material: Aluminum & Stainless Steel & Brass.
Installation type: external thread connection
Nozzle size: 0.4mm
Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F)

Capricorn Bowden PTFE Tubing:
1)Capricorn Teflon tube is well regarded as the highest quality PTFE tubing in all of 3D printing.
The tight tolerances make sure that the filament is lead directly to the hot end with as little
room for error as possible between the extruder and the hot end.
2) Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the
market which is perfect for printing exotic filaments such as ABS, Nylon, and
Polycarbonate. Standard PTFE tubing may experience dangerous “off-gassing” if
the hot end is heated to temperatures beyond 240*C and will get worse with higher heats.
This Capricorn XS series is safe in 3D printer usage up to 300*C thanks to its
proprietary manufacturing methods

24V Cooling and Circle fan:
Fans easy installation and high-efficiency heat dissipation;
Cooling fans with Low noise and 6000r/min rated speed;
2 Terminal Connector with 2pin-ph2.5

Package List:
1× Ender 3 Hot End Kit with Capricorn PTFE Tubing XS Series
5×0.4mm Nozzle
1× 24V Cooling Fan
1× 24V Circle Fan

6. 3D Printer Cooling Fan 40mm x 40mm x 10mm Blower Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino (24V 0.08A)

3D Printer Cooling Fan 40mm x 40mm x 10mm Blower Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino (24V 0.08A)

Feature

7. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

Feature

Description

Color:12V

This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.

 

Specification:

Rated Voltage: DC 12V

Consuming Current: 0.08A

Connector: 2pin-ph2.5

Speed: 6000 + -10% RPM

Air Flow: 6.5 CFM

Static Pressure: 2.9

Noise Level: 27dBA

Note: Any questions, you can contact us and we will give you a satisfied solution!

Notice!!!

Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.

8. Aibecy 24V Assembled Hotend Extruder Kit with 0.4mm Nozzle Aluminum Heating Block 3D Printer Parts Compatible with Creality Ender 3 Ender 3 Pro 3D Printer

Aibecy 24V Assembled Hotend Extruder Kit with 0.4mm Nozzle Aluminum Heating Block 3D Printer Parts Compatible with Creality Ender 3 Ender 3 Pro 3D Printer

Feature

Description

Features:
This extruder set is compatible with Creality Ender 3, Ender 3 Pro and other 3D printers.
Mainly including 2 fans, fan cover, heat block, cooling block, nozzle, throat pipe, connector, cable, tube, etc.
Stainless steel material nozzle throat and high quality resistance whose temperature can up to 260 °C/ 500 °F.
Nozzle and tube connect seamless, prevent material leaking and blocking. Heating tube, 24V 40W.
Durable and good performance, fully assembled, you can install directly, good kit for your 3D printer.

Specifications:
Main Material: Aluminum & Stainless Steel & Brass
Nozzle Size: 0.4mm(Brass)
Heating Tube: 24V 40W
Aluminum Heat Block: 20 mm * 20 mm * 10 mm
Fits For: Compatible with Creality Ender 3, Ender 3 Pro
Package Included: (Nozzle+Fans+Fan Cover+Heat Block+Cooling Block+Throat Pipe+Connector+Cable+Tube,etc)
Operating Temperature Range: -40 ~ +260°C (-40 ~ +500 °F)
Package Size: 13.7 * 11.5 * 7.9cm / 5.4 * 4.5 * 3.1in
Package Weight: 241g / 8.5oz

Package List:
1 * Extruder Kit

 

9. Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

Feature

Description

Descriptions:
Please recognize the seller: Wangdd22
Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer.

Notice: Small parts, keep away from children

Specification:
12V/40W heater,temperature can be up to 280°C(Long-term temperature: 240°C/ short-term temperature: 280°C)
12V high speed fan with shroud, radiating quickly
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 tube fitting
A v6 heating block
Outer thread : M6 M7
Throat outer diameter: 6mm
Throat inner diameter: 4mm
Teflon pipe inner diameter: 2mm
Length of nozzle throat: 22.5mm
Filament diameter : 1.75mm
Extruder brass nozzle input diameter: 1.75mm
Extruder brass nozzle output diameter: 0.3mm 0.4mm 0.5mm

Package including:
1 x all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/ extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.3mm nozzle print head
1 x 0.4mm nozzle print head
1 x 0.5mm nozzle print head
1 x V6 heating block
2 x teflon tube within stainless steel nozzle throat

10. Aibecy 4010 Brushless Blower Cooling Fan Turbo Fan 40 40 10mm 24V DC with Ball Bearing 2Pin Connector for CR-8S Ender 3 3D Printer Hotend Extruder

Aibecy 4010 Brushless Blower Cooling Fan Turbo Fan 40 40 10mm 24V DC with Ball Bearing 2Pin Connector for CR-8S Ender 3 3D Printer Hotend Extruder

Feature

Description

Size:A

Features:
DC 24V 0.1A operation voltage, fit for CR-8S Ender 3 3D printer extruder.
2Pin connector, wire length approx. 100cm / 39.4in.
Waterproof , dust-proof and super noise-reduced.
Easy installation and high-efficiency heat dissipation,
Extend the life of your 3D printer, best accessory for you.

Specification:
Volume: 4010
Compatibility: CR-8S/ Ender 3
Noise: 20dBA
Speed: 7600 r/min
Connector: 2Pin
Bearings: Oil-bearing
Cable Length: Approx. 100cm / 39.4in
Rated Power: DC 24V 0.1A
Item Body Size: 4 * 4 * 1cm / 1.6 * 1.6 * 0.4in
Item Weight: 16.5g / 0.6oz
Package Size: 13 * 9 * 1cm / 5.1 * 3.5 * 0.4in
Package Weight: 18.7g / 0.7oz

Package List:
1 * Blower Fan

 

Conclusion

By our suggestions above, we hope that you can found Nozzle Cooling Fan For A 3D Printer for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general