Finding your suitable readers for pioneer mini split heating and cooling parts is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for pioneer mini split heating and cooling parts including detail information and customer reviews. Let’s find out which is your favorite one.
899 reviews analysed
1. pioneer air conditioner Decorative PVC Line Cover Kit for Mini Split Air Conditioners and Heat Pumps – WYS-LCVR-KIT
Finish up your ductless mini splut unit installation for a professionally installed look. Protects the line set, wiring and drainage lines from weather and other elements. Can be added on to new or existing installations. Suitable for 9000, 12000, and 18000 BTU systems. Parts included : a. Three straight lengths of 32 inches each. b. Two different types of 90 degree elbows. c. One wall cap for entry point. d. One reducer, and two couplings. e. One 20” flexible length, for condenser connection. f. One 24” flexible length. g. Plastic anchors, screws and cable ties. h. Total coverage up to 13 feet.
2. Forestchill Foldable Wall Mount Bracket, fits Mini Split Ductless Outdoor Unit Air Conditioner Condensing Unit Heat Pump System Condenser Universal Design, Support up to 280lbs, 9000-18000 BTU, 1-2P
- ●Rust free Material-Galvanized steel with powder-coating surface treatment, anti-rusting and weather-proof, perfect for outdoor application.
- ●Heavy Duty Construction-Made of 16 gauge thick steel for heavy duty supporting purpose, supports up to 280lbs
- ●Easy Installation- Hardwares included for your convenience, vibration isolation pads are provided for noise and vibration control purpose.
- ●Esay Air Flow-This bracket has long horizental resting bars, provides neccessary clearance (minimum 5” for wall mount, 12” for ground mount ) for condensing operation.
- ●Protection-Install this bracket on the wall and rises the condenser above to avoid dust, debris, water, snow, keep the condenser clean and expend service life.
Forestchill Foldable Wall Mount Bracket
A perfect but simple solution to set your condensor or other machinery, keep the machine away from the ground to avoid dirt, flood and snow, expend service life
Clearfully designed through experience, provide enough clearance for condensing operation and save space
All necessary hardwares included for your convenience. 4 rubber vibration absorber are provided for noise and vibration control.
Important note: Avoid mounting your A/C condensing unit on your bedroom wall, your will still feel the vibration even with the vibration isolation pads installed.
Material: Galvanized steel
Surface treatment: Powder coating
Material thickness: 16 gauge
Loading capacity: Maximum 280 lbs
Dimensions: Height: 14-3/8” Depth: 17-3/4”
Support: 9000~18000 BTU
1 set (2 pieces) L-shaped Flodable Wall Mount Bracket, hardwares including anchor bolts, nuts, anti-vibration pads.
3. Daikin 12,000 BTU 17 SEER Wall-Mounted Ductless Mini-Split Inverter Air Conditioner Heat Pump System 15 Ft. Installation Kit & Wall Bracket (230 Volt) 10 Year Limited Warranty
- 10 Years Limited Warranty
- Daikin 17 SEER Wall-Mounted Ductless Mini-Split Inverter Air Conditioner Heat Pump System (230 Volt)
- Includes: Indoor Fan Coil, Outdoor Condensing Unit, Remote Control, 10 Ft. Installation Kit, and Wall Bracket
- Energy Efficient – 17 SEER, 9 HSPF.
- Coverage Area of 550 Sq.Ft. Applications: Primary living areas (master bedrooms), hot or cold rooms, renovations & remodeling, basements, attics & garages.
As you think about the functionality of your home’s indoor comfort system, the Daikin brand is ready to help you achieve control, energy efficiency and long-term peace of mind. Take that attention to quality one step farther by choosing a Daikin brand energyefficient ductless split system. We have designed and engineered all of our products to provide years of consistent indoor comfort delivering you and your family premium Comfort for Life. Energy Efficient – 17 SEER, 9 HSPF, 10 Year Parts Limited Warranty and Turbo mode cools or warms up the room fast. The Daikin brand 17 Series is designed to blend in discreetly with any home design and are ideal for single rooms. Smart inverter technology integrated with an inverter variable-speed compressor, 17 Series ductless systems delivers the capacity required to maintain desired room conditions, typically reducing energy consumption (compared to traditional fixed-speed ducted systems). This technology minimizes temperature fluctuations and provides continuous cooling and heating comfort.Designed for Comfort for Life, the Daikin 17 Series units include features to ensure a comfortable experience every moment. From the wide angle louver design to the auto-swing and comfortable mode controller settings, effective heating and cooling is ensured throughout the space. Utilizing inverter technology to maintain comfort settings, Daikin systems most often operate at low speeds with indoor sound levels as low as 37 decibels (dB) and outdoor sound levels as low as 51 dB. Activate the indoor unit quiet operation and sound levels drop by 2-3 dB for gentler heating and cooling and quiet operation. Additional features: Energy Efficient – 17 SEER, 9 HSPF, Undisturbed Comfort, Advanced Filtration, Wireless Control. Applications:Primary living areas (master bedrooms and living rooms), Hot or cold rooms, Rooms with poor air flow, Renovations and remodeling, Basements, attics and garages, new construction.
4. PIONEER Foldable Condenser Bracket 2P (18"L x 16"H) White
- Heavy Duty Steel Construction, Galvanized and Epoxy Painted.
- Includes all hardware for attaching the condenser plus 4 expansion bolts for wall mounting.
- 4 Rubber vibration absorbers also included.
- 4 sizes to choose from. Pick the bracket that fits the BTU output of your machine.
- Raises the condensing unit above floor for protection from dirt, snow, debris, floods and other perils.
Heavy duty steel bracket, Made with ultra galvanized steel and Epoxy paint for installing mini split condensing units against the wall properly.
5. Outdoor Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser
- Universal Heavy Duty Outdoor Wall Bracket. Fits 9000-36000 Btu Units. Dimensions: Width: 33.5″ Height: 18″ Depth: 22″
- Adjustable for use with up to 9,000 – 36,000 BTU Units not exceeding a maximum weight capacity of 350 lbs. It includes hardware and expansion bolts for wall mounting
- The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. As an alternative to ground level pads, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, snow, debris, floods, vandalism, etc.
- Cross bar, Two L-shaped brackets (foldable), Each arm has two upgraded 8.8 grade bolts with lock nuts, Wall fixation kit, Anti-vibration feet ungraded to 1 1/4 inches tall
- Slight rearward tilt to wall is recommended for safety purposes. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load. Requires 1/2 inch (12 mm) bit.
Used for supporting condensing units up to 350 pounds, this bracket features a crossbar that is attached to the wall, and two L-shaped support brackets that are hooked and bolted into place on the crossbar. The condensing unit is mounted onto the L-shaped brackets, and fastened using the bolts and anti-vibration feet provided. Please check to ensure clearance requirements are being met for your minisplit unit. The bracket is 18″ tall and the arms are 22″ long. See pictures for dimensions.
6. Pioneer Ductless Mini Split System Charging Vacuum Port Adapter Swivel Type, 5/16 Female, 1/4 Male SAE
New R410A Ductless Mini Split Systems are usually equipped with a different charging port size to avoid charging of wrong refrigerant into the system (i.e. R22). This new port size is 5/16″ SAE and some gauge sets carry 1/4″ SAE connectors. Port adapter converts the 5/16″ SAE ports to use with 1/4″ SAE gauge sets.
7. Senville 16 Ft. Insulated Copper Line Set for Mini Split Air Conditioner, 3/8" & 5/8" OD, White
- 16 Ft. Insulated High Quality 3/8″ & 5/8″ Pre-Flared Copper Line Set with Wiring Harness Included.
- Weather Resistant and Durable Construction. UV Resistant Insulation. Complete Installation Kit.
- Suitable for Most Mini Split Air Conditioners Including Most Major Brands. Designed by Senville, the Trusted Mini Split AC Brand.
- Important Note: Please Verify Line Set Requirements with Your Mini Split Air Conditioners Manufacturer Equipment Sheet Data.
16′ Line Set Extension for Ductless Air Conditioners ( 3/8″ and 5/8”) – Compatible with most mini split air conditioners.
8. SereneLife 10,000 BTU Portable Air Conditioner + 9,000 BTU Heater, 4-in-1 AC Unit with Built-in Dehumidifier, Fan Modes, Remote Control, Complete Window Exhaust Kit for Rooms Up to 350 Sq. Ft
- HANDY AND PORTABLE: The Serene Life Portable Air Conditioner System features a lightweight, handy, sleek body design intended to be used in the bedroom, living room, or garage at home or office. It features rolling wheels for easy portability
- BUILT-IN DEHUMIDIFIER: You don’t only get the cooling effect of the portable AC, but it also helps reduce humidity levels, acts as purifier which makes your home less hospitable to allergens such as dust mites, mold, and mildew by selecting dehumidifier mode
- 4 OPERATING MODES: The compact floor AC indoor cooler conditioning unit features a simple electric plug in operation and has 4 modes – cooling, heating, dehumidifier, and fan. Also features automatic swing mode w/ moving wind vent for maximum air circulation
- REMOTE CONTROL: Features a digital touch button control panel which includes the power, mode, timer, temperature, and fan speed settings. Other functions such as unit selector (°C/°F), sleep key can be adjusted using the included remote control
- GREAT FOR ALL YEAR ROUND: With 10, 000 BTU cooling power and 9, 000 BTU Heating power, this is the best option to save space and money. The cold air can cover a room up to 350+ sq. ft. , Air flow is rated at 290 m3/hr., moisture removal/dehumidifier at 15 liters/hr. w/ an operating noise level of only 52-56 dBa
9. Rectorseal LD 4.5" 12′ Wall Duct KIT WH 122 White
- Assures complete flexibility of installation
- Professional grade ducting, protects and hides unsightly mini-split linesets in a snap
- Fortress is perfect for mini-splits, high velocity and conventional split air conditioning systems.
- Fortress protects lineset, wiring and drain hose from weather, vandalism, pet and pest damage.
- Fortress installs quickly, and can be easily accessed for repairs or replacement of the lineset.
Fortress standard professional grade duct and fittings. More moderate price point. Fortress professional duct/ fitting system hides unsightly ac lineset. 2 duct sizes – 3.5″ and 4.5″, accommodate single or multiple lineset configurations. Longer ducting length – 8Ft. Allows for fewer joints.
From the Manufacturer
Fortress Standard professional grade duct and fittings. More moderate price point. Fortress professional duct/ fitting system hides unsightly AC lineset. 2 duct sizes – 3.5″ and 4.5″, accommodate single or multiple lineset configurations. Longer ducting lenght – 8ft. Allows for fewer joints.
By our suggestions above, we hope that you can found Pioneer Mini Split Heating And Cooling Parts for you.Please don’t forget to share your experience by comment in this post. Thank you!