Nowadays, there are so many products of solar cpu cooling fan in the market and you are wondering to choose a best one.You have searched for solar cpu cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings solar cpu cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
710 reviews analysed
1. Coolerguys 120mm (120X120X38) High Airflow Waterproof IP67 12v Fan
- ENVIRONMENTAL RESISTANCE: IP67 design technology allows this to be completely dustproof and waterproof (rated to be submerged up to 1m for 30min).
- HIGHER AIRFLOW/LOWER NOISE: Updated blade and motor designs allow this to put out 157 cubic feet per minute with a noise level of 45db. That’s equivalent to the ambient noise of nighttime in the suburbs or a standard kitchen fridge.
- LONG LASTING: Dual ball bearings give a long projected lifespan of up to 67,000 hrs–that’s over 7 years. Backed by manufacturer with a 3 year warranty.
- STANDARD CONNECTOR: Standard 3 pin native connector allows for easy adaptability with many systems. Contact us if you need to determine which is the positive, negative, or tachometer (speed sensor) wires as they’re all painted black.
Coolerguys 120mm (120x120x38) High Speed IP67 Fan
Fan Size: 120x120x38mm
RPM: 3500 +/- 10%
Rated Current: 0.75 Amp
Airflow: 157 CFM
Noise: 45 dB
Rated Voltage: 12 V DC
Bearing Type: Ball Bearing
Coolerguys is proud to launch our IP67 dust and waterproof fan series. These IP67 fans can be submerged up a meter underwater for up to 30 minutes. These are perfect for systems exposed to the elements such as solar enclosures, yachts, pest control, and exterior AV systems.
2. GDSTIME Dual Ball Bearings 120mm x 120mm x 25mm 5 inch 12v Brushless DC Cooling Exhaust Fan
- Dimension of outer the frame is 120mm(L) x 120mm(W) x 25mm(H) / The size of fan in inch is 4.72in(L) x 4.72in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 105±0.3mm/4.13in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.) The started Voltage is 3.6V.
- Rated Voltage: DC 12V
- Rated Current: 0.3Amp ±10%
- Rated Speed: 2500 RPM
- Air flow: 83.2CFM
- Noise: 35.7dBA
- Power: 3.5Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Dual Ball Bearings
- Life: working up to 50000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
3. Coolerguys Programmable Thermostat Cooling Kit for Cabinets, AV, and Components (Metal, Dual 120mm Pro)
- (2) Coolerguys Low speed ultra quiet 120 x 25mm Sleeved Fan 3pin / 12V
- Coolerguys Programmable Thermal Fan Controller with LED Display
- Front plate Dimensions: 15.00″ x 6.25″ (375 x 156.25mm) / Cut out Dimensions:13.00″ x 5″ (330 x 127mm)
- Fan Specs: 1200 RPM, 47CFM, 20dba
- 3 year replacement warranty when purchased from Coolerguys
4. PLUSPOE DC 5V USB Brushless Cooling Fan, 40mm x10mm, Dual Ball Bearing Quiet Operation w/Speed 6800 RPM
- Rated Voltage: 5V DC, Current: 0.2A
- Airflow: 7.52CFM, Speed: 6800RPM, Noise: 26 dBA
- Bearing Type: Dual Ball Bearing
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright
- Lead Wire: USB, length: 500mm/19.68inch
- USB plug can power the fan through USB ports found behind popular AV electronics and game consoles.
Package Included: 1 x USB DC brushless fans.
Housing: Black PBT (UL94V-0)
Fan Blade: 9 Blades (Provide Bigger Airflow than 7 Blades), Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Rated Voltage: 5V DC
Operating Voltage Range: 4.5-5.5V DC
Start-up Voltage: 3.5V DC
Rated Current: 0.08A (0.20A Max.)
Rated Power: 0.40W (1.0W Max.)
Rated Speed: 6800RPM
Air Flow: 7.52CFM
Air Pressure: 2.98mmH2O
*Noise Level: 26 dB(A)
Conform to RoHS: Yes
Safety Approvals: CE FCC ROHS
Life Expectancy: 67000H at 25degree test
Net Weight: 18.7g
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
5. Asiahorse FS-9002 20+8LED(in and Outside Light efect) ARGB White 120mm Case Fan with 5V PWM Motherboard Sync/Analog Controller (5 Pack)
- 1. Out Frame- 20 lights, In Frame 8 lights, 28 lights in total by Design. With RGB three colors, you can freely combine the best light effect without any defects.
- 2. Synchronized your gaming station – Control fan lighting with select 5V addressable RGB motherboards. Supported motherboard software includes as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync etc.
- 3. Analog ARGB controller – low-profile pc case without RGB Cable motherboards. Choose from 4 Preset colors (red, green, blue, White, rainbow 1.0, and rainbow 2.0), Hundreds of LED modes and off mode (wave, full light, RGB spectrum, off, flow, ripple, pulse, and blink), and 4 LED speeds.
- 4. The LED bead is made of gold wire material, which can effectively reduce the LED exhaustion and keep the light in the best bright state for a long time
- 5. Silent & efficient – feature hydraulic Bearing self-lubricates with a friction-reducing substance for quiet operation without sacrificing performance.
Our Fan can display the lighting effect inthe order of queue, and create the Half-Light function to add the sci-fi effectof the half-moon eclipse to your chassis,Hope you like.
In order to achieve the effect of SeriesLight, Please install the fan according to the installation sequence on themanual. If you have any questions, You can contact customer service in time.
5 X 120mm Asiahorse FS-9002 Case Fan(6 Pininterface)
1 X 2.4G Pwm Sync HUB&Remote (6 Pininterface)
1 X PWM CABLE
1 X Sync motherboardCABLE
1 X SATA POWER CABLE
TIPS: The asiahorse controller and the fanmust be used together
1. please do not use our rgb controller toconnect other brands of RGB fan.
2. please do not use our fans to access otherbrands of RGB controller
6. Coolerguys Quiet AC Powered Receiver/Component Cooling Fan Kits (120mm)
Silent and simple, just plug in and place on or near the component that needs cooling, uses standard 110v AC 2 prong outlet for power but uses a reliable yet quiet DC fan.
Comes with (4) rubber feet to keep the fan from moving and scratching components.
Help prevent your receiver, dvr, console or other component from overheating which can lower life expectancy.
As always all of our parts come with a 3 year replacement warranty, the fan uses dual ball bearings which have a 50,000 life expectancy @ 40C (104F) which equates to nearly 6 years of continuous usage
Fan has 12″ tail, power supply has 48″ so you can place the fan upto 60″ (5ft) away from the AC outlet
Coolerguys Ultra Quiet 120x25mm 5 Volt Fan with 4pin Connector : 840556087908
(4) Adhesive backed rubber pads : 840556096917
CG 110V AC to 5V DC Power Supply with 4 Pin Molex (500mA) 4ft power cord: 840556087885
(4) Nylon Multi-Purpose zip ties Black
Current: 0.23A / 1.15W
Max Static Pressure: 1.85mmH2O
Connector: 4 pin
RPM: 1200 +/- 10%
Air Volume: 45.2 CFM
Bearing: Dual Ball
Life Hours: 50,000 @ 40C
Tail is 12 inched wrap sleeved 2/wire.
Not compatible with our thermal control units
7. Noctua NF-A14 iPPC-2000, Heavy Duty Cooling Fan, 3-Pin, 2000 RPM (140mm, Black)
- Heavy duty cooling fan, 140x140x25 mm, 12V, 3-pin Molex, max. 2000 RPM, max. 31.5 dB(A), >
- 150,000 h MTTF
- Award-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior cooling efficiency
- 12V 2000rpm model (31.5dB) with 3-pin connector
- High-speed industrialPPC version for industrial heavy-duty applications that require extreme cooling performance and advanced ingress protection
- Ruggedised fibre-glass reinforced polyamide construction and IP52 certified water and dust protection
8. upHere 120mm Computer Case Fan Rainbow LED Silent Fan for Computer Cases, CPU Coolers,Water Cooler and Radiators Ultra Quiet,3 Pack Colorful Case Fan(F03CF)
- 1.Rainbow LED effect: Dynamic Rainbow illumination effect, breathable effect and high airflow to keep your computer fresh.* The color version can realize the automatic color lighting effect, but it cannot be connected to the motherboard or the controller to control the lighting effect.
- 2.HIGH EFFICIENCY, MUTE-Combination of high efficiency heat dissipation and mute,11 pcs bionic shark fin fan vanes,There is cut back processing on both external and internal of the fan frame to make a large amount of air and improve the heat transfer, Corner breakage design of the fan vanes is to reduce the noise and increase wind pressure. In addition, the fan vanes have been polished, not easy to stick ash.
- 3.ASEISMATIC DESIGN-Silent noise reduction,That 8 damping silicone pads fixed on both sides of the fan frame is to reduce the noise of the polarization motor vibration.
- 4.Perfect Cooling Performance:Tuned for high-airflow, large volume cooling, silent operation as an excellent choice for case cooling.
- 5.Wide Compatibility:The most commonly 120mm size for computer case.Compatible 3-pin connector for mainboard and power supply that also works with 4-pin headers.
9. URBEST 90mm x 25mm DC 12V 2Pin Cooling Fan for Computer Case CPU Cooler
Application to car seat, computer, electrical appliances, tools, machine, units, power supply, network equipment, office equipment, lighting, shoe ark, sanitary equipment children toys, supply of heat dissipation problems, reducing equipment working environment temperature, prolong the service life of equipment. The mounting screws are not included.
10. Coolerguys USB Powered Cooling Fan Kits (Single 120mm)
Coolrguys USB Powered 120mm Fan with Cabinet Bracket
This 120mm USB version of our Cabcool cooling kits is a great selection if you just want a no nonsense easy to install kit to keep your stuff cool. To use this kit you will need access to a USB port.
This is a complete kit for a single 120mm fan unit (6.25" x 6.25" x .125") that will quietly cool your cabinet or multimedia center.
Can be mounted on any side of a cabinet, where room permits, by cutting a hole approximately 3/4" smaller on all sides of the outside bracket.
Insert completed cooler assembly in hole and attach to cabinet with appropriate screws.
Fan(s) can be set to blow into or out of the cabinet depending on your needs.
Cooling Unit includes the following:
(1) Coolerguys 120x120x25mm USB Fan with Grill
(1) Black Fan bracket (6.25" x 6.25" x .125")
(1) Black 120mm Mesh Grill with Honeycomb 6mm holes
(1) Black 120mm Black Fan Grill/Guard
(8) Fan Screws to attach grill(s)
Pack – 4" Nylon Multi-Purpose Tie Black
(4) 1/2" black Cabinet screw(s)
All necessary screws, cables, and fasteners to complete the unit are included
Rated Voltage: 5 Volts
Tail: 16 inch /Dual
RPM: 1200 +/- 10%
Bearing: Dual Ball
MTFB: 50,000 hrs
br> This is a DIY kit and some assembly and installation is needed.
By our suggestions above, we hope that you can found Solar Cpu Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!